i ntegrated c ircuits d ivision www.ixysic.com ds-LCB120-r09 1 LCB120 single-pole, normally closed optomos ? relay e 3 pb part # description LCB120 6-pin dip (50/tube) LCB120s 6-pin surface mount (50/tube) LCB120str 6-pin surface mount (1000/reel) * for other packaging options consult factory. parameter ratings units blocking voltage 250 v p load current 170 ma rms / ma dc on-resistance (max) 20 ? applications features description ordering information pin configuration ? telecommunications ? telecom switching ? tip/ring circuits ? modem switching (laptop, notebook, pocket size) ? hook switch ? dial pulsing ? ground start ? ringing injection ? instrumentation ? multiplexers ? data acquisition ? electronic switching ? i/o subsystems ? meters (watt-hour, water, gas) ? medical equipment-patient/equipment isolation ? security ? aerospace ? industrial controls ? 3750v rms input/output isolation ? low drive power requirements (ttl/cmos compatible) ? surface mount tape & reel version available ? arc-free with no snubbing circuits ? fcc compatible ? vde compatible ? no emi/rfi generation ? small 6-pin package ? machine insertable, wave solderable approvals switching characteristics of normally closed devices 1 3 2 4 5 6 + control C control do not use load do not use load ac/dc configuration 1 3 2 4 5 6 + control C control do not use + load C load dc only configuration form-b i f 10% 90% i load t on t off ? ul recognized component: file e76270 ? csa certified component: certificate 1175739 ? en/iec 60950-1 certified component: tuv certificate b 09 07 49410 006 the LCB120 is a single-pole, normally closed (1-form-b) relay that uses optically coupled mosfet technology to provide 3750v rms of input to output isolation. its optically coupled outputs, which use the patented optomos architecture, are controlled by a highly efficient gaaias infrared led. the LCB120 has low on-resistance, and is well suited for most applications requiring a normally closed relay.
i ntegrated c ircuits d ivision www.ixysic.com 2 r09 LCB120 absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. absolute maximum ratings @ 25oc parameter ratings units blocking voltage 250 v p reverse input voltage 5 v input control current 50 ma peak (10ms) 1 a input power dissipation 1 150 mw total power dissipation 2 800 mw isolation voltage, input to output 3750 v rms operational temperature -40 to +85 c storage temperature -40 to +125 c 1 derate linearly 1.33 mw / oc 1 derate linearly 6.67 mw / oc parameter conditions symbol min typ max units output characteristics load current , continuous ac/dc con? guration -i l - - 170 ma rms / ma dc dc con? guration - - 300 ma dc peak load current t=10ms i l - - 400 ma p on-resistance ac/dc con? guration i l =170ma r on -1120 ? dc con? guration i l =300ma - 5 6 off-state leakage current i f =5ma, v l =250v p i leak --1 ? a switching speeds turn-on i f =5ma, v l =10v t on - 0.65 5 ms turn-off t off - 1.30 5 ms output capacitance v l =50v, f=1mhz, i f =50ma c out -50 -pf input characteristics input control current to activate i l =170ma i f --5ma input control current to deactivate - i f 0.4 - - ma input voltage drop i f =5ma v f 0.9 1.2 1.4 v reverse input current v r =5v i r --10 ? a common characteristics input to output capacitance - c i/o -3 -pf electrical characteristics @ 25oc
i ntegrated c ircuits d ivision LCB120 www.ixysic.com 3 r09 *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. 35 30 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 led forward voltage drop (v) device count (n) typical led forward voltage drop (n=50, i f =5ma) 0.42 0.66 0.90 0.54 0.78 turn-on time (ms) device count (n) 35 30 25 20 15 10 5 0 0.30 typical turn-on time (n=50, i f =5ma, i l =170ma dc ) 0.875 1.375 1.875 0.625 1.125 1.625 turn-off time (ms) device count (n) 35 30 25 20 15 10 5 0 typical turn-off time (n=50, i f =5ma, i l =170ma dc ) 0.63 0.81 1.17 1.53 0.99 1.35 led current (ma) device count (n) 30 25 20 15 10 5 0 typical i f for switch operation (n=50, i l =170ma dc ) 35 25 20 15 10 5 0 0.63 0.99 1.35 0.45 0.81 1.17 led current (ma) device count (n) typical i f for switch dropout (n=50, i l =170ma dc ) 35 30 25 20 15 10 5 0 10.4 10.8 11.2 12.0 11.6 12.4 on-resistance ( : ) device count (n) typical on-resistance distribution (n=50, i l =170ma dc ) 35 30 25 20 15 10 5 0 291.25 293.75 296.25 298.75 301.25 303.75 blocking voltage (v p ) device count (n) typical blocking voltage distribution (n=50, i f =5ma) led forward voltage drop (v) typical led forward voltage drop vs. temperature 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 120 100 i f =50ma i f =30ma i f =20ma i f =10ma i f =5ma temperature (oc) led forward current (ma) turn-on time (ms) 0 5 1015202530354045 0.634 0.632 0.630 0.628 0.626 0.624 0.622 50 typical turn-on time vs. led forward current (i l =170ma dc ) led forward current (ma) turn-off time (ms) 0 5 1015202530354045 1.2 1.0 0.8 0.6 0.4 0.2 0 50 typical turn-off time vs. led forward current (i l =170ma dc ) performance data* (@25oc unless otherwise noted)
i ntegrated c ircuits d ivision www.ixysic.com 4 r09 LCB120 *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. on-resistance ( : ) -40 60 50 40 30 20 10 0 -20 0 20 40 60 80 100 temperature (oc) typical on-resistance vs. temperature (i l =170ma dc ) turn-on time (ms) -40 0.12 0.10 0.08 0.06 0.04 0.02 0 -20 0 20 40 60 80 100 typical turn-on time vs. temperature (i f =5ma, i l =170ma dc ) temperature (oc) turn-off time (ms) -40 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 80 100 i f =5ma i f =10ma i f =20ma typical turn-off time vs. temperature (i l =170ma dc ) temperature (oc) led current (ma) -40 3.0 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 80 100 temperature (oc) typical i f for switch operation vs. temperature (i l =170ma dc ) led current (ma) -40 3.0 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 80 100 typical i f for switch dropout vs. temperature (i l =170ma dc ) temperature (oc) load current (ma) 250 200 150 100 50 0 maximum load current vs. temperature (i f =0ma) -40 -20 0 20 40 60 80 120 100 temperature (oc) load voltage (v) load current (ma) 200 150 100 50 0 -50 -100 -150 -200 -2.0 -1.5 -1.0 -0.5 0.5 1.0 1.5 0 2.0 typical load current vs. load voltage blocking voltage (v p ) -40 310 305 300 295 290 285 -20 0 20 40 60 80 100 typical blocking voltage vs. temperature (i f =5ma) temperature (oc) leakage ( p a) -40 0.030 0.025 0.020 0.015 0.010 0.005 0 -20 0 20 40 60 80 100 typical leakage vs. temperature measured across pins 4&6 (i f =5ma) temperature (oc) time load current (a) 1.2 1.0 0.8 0.6 0.4 0.2 0 10 p s 1ms 100ms 10s 100 p s 10ms 1s 100s energy rating curve performance data* (@25oc unless otherwise noted)
i ntegrated c ircuits d ivision LCB120 www.ixysic.com 5 r09 manufacturing information moisture sensitivity all plastic encapsulated semiconductor packages are susceptible to moisture ingression. ixys integrated circuits division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, ipc/jedec j-std-020 , in force at the time of product evaluation. we test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. this product carries a moisture sensitivity level (msl) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard ipc/jedec j-std-033 . device moisture sensitivity level (msl) rating LCB120 / LCB120s msl 1 esd sensitivity this product is esd sensitive , and should be handled according to the industry standard jesd-625 . reflow profile this product has a maximum body temperature and time rating as shown below. all other guidelines of j-std-020 must be observed. device maximum temperature x time LCB120 / LCB120s 250oc for 30 seconds board wash ixys integrated circuits division recommends the use of no-clean flux formulations. however, board washing to remove flux residue is acceptable. since ixys integrated circuits division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. chlorine- or fluorine-based solvents or fluxes should not be used. cleaning methods that employ ultrasonic energy should not be used. e 3 pb
i ntegrated c ircuits d ivision www.ixysic.com 6 r09 LCB120 dimensions mm (inches) pcb hole pattern 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 5.080 0.127 (0.200 0.005) 6 - 0.800 dia. (6 - 0.031 dia.) 0.254 0.0127 (0.010 0.0005) 9.144 0.508 (0.360 0.020) 7.239 typ (0.285 typ) 7.620 0.254 (0.300 0.010) 3.302 0.051 (0.130 0.002) 4.064 typ (0.160 typ) 0.457 0.076 (0.018 0.003) 8.382 0.381 (0.330 0.015) 2.54 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 1.651 0.254 (0.065 0.010) pin 1 dimensions mm (inches) pcb land pattern 0.254 0.0127 (0.010 0.0005) 7.620 0.254 (0.300 0.010) 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 8.382 0.381 (0.330 0.015) 2.54 0.127 (0.100 0.005) 9.524 0.508 (0.375 0.020) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 1.651 0.254 (0.065 0.010) pin 1 LCB120 LCB120s mechanical dimensions
i ntegrated c ircuits d ivision specification: ds-LCB120-r09 ?copyright 2012, ixys integrated circuits division optomos? is a registered trademark of ixys integrated circuits division all rights reserved. printed in usa. 12/22/2012 for additional information please visit our website at: www.ixysic.com 7 LCB120 ixys integrated circuits division makes no representations or warranties with respect to the accuracy or completeness of the co ntents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity a re expressed or implied. except as set forth in ixys integrated circuits division?s standard terms and conditions of sale, ixys integrated circuits division assumes no liability whatsoever, a nd disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infri ngement of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of ixys integrated circuits division?s product may resul t in direct physical harm, injury, or death to a person or severe property or environmental damage. ixys integrated circuits division reserves the right to discontinue or make changes to its p roducts at any time without notice. notes: 1. all dimensions carry tolerances of eia standard 481-2 2. the tape complies with all notes for constant dimensions listed on page 5 of eia-481-2 dimensions mm (inches) embossment embossed carrier 330.2 dia (13.00 dia) top cover tape thickness 0.102 max (0.004 max) w=16.00 (0.63) b 0 = 10.10 (0.398) a 0 = 10.10 (0.398) p = 12.00 (0.472) k 1 = 3.80 (0.15) k 0 = 4.90 (0.19) user direction of feed LCB120str tape & reel
|
